2 Ton Mini Split

How Many BTU Is A 2 Ton Mini Split

A 2 Ton Mini Split typically delivers a cooling capability of 24,000 BTUs per hour. In air conditioning terminology, the "ton" designation signifies the unit's cooling capacity, equivalent to 12,000 BTUs per hour.

How Many Amps Does A 2 Ton Mini Split

The amperage (amps) consumption of a 2 ton Mini Split air conditioner may vary depending on factors like the model, voltage, and operational circumstances. But generally, a 2 Ton Mini Split typically needs about 15-20 amps when running normally. For the exact amps your mini split uses, it's best to check the information provided by the manufacturer.

How Much Is A 2 Ton Mini Split

Generally, you can expect to pay anywhere from $1,500 to $4,000 or more for the equipment alone for a 2 Ton Mini Split. The cost can vary depending on brand, model, features, installation requirements, and location.

How Much Does A 2 Ton Mini Split Cover

As a general guideline, a 2 Ton Mini Split can effectively cool an area of approximately 800 to 1,200 square feet. But, it varies depending on climate, insulation, ceiling height, and room layout.

What Is A 2 Ton Mini Split

The size of a 2 Ton Mini Split is rated by the number of BTUs (British Thermal Units) it can handle per hour. A 2 Ton Mini Split typically has an output of 24,000 to 30,000 BTUs and is designed to cool an area of up to 1,333 square feet. This system is also energy efficient and can save money on monthly energy costs.

Installing a 2 Ton Mini Split

When it comes to installation, most 2 Ton Mini Splits can be installed DIY. However, hiring a professional is best if you're looking for a more complex setup with multiple units. This will ensure that the installation is done safely and correctly.

Mini-Split Brand Consideration 

Finally, you should consider the features and brand. Different brands will offer different features such as multiple fan speeds, air filters, easy-to-use controls, and even timer settings. Some top brands include MRCOOL and Buck Cool. 

Perfect for Spaces with Limited or no Ductwork

A 2 Ton mini split is ideal for spaces with limited or no ductwork, like your RV or cabin. Because they don't require any vents and run off electricity, they can be installed relatively quickly and are great for adding air conditioning in areas where you didn't think it was possible before. 

Understanding Mini Split You Need

Before you can pick the perfect mini split for your home, you need to know the difference between a 12000 BTU, 18000 BTU, and 36000 BTU unit. The wattage refers to how much heat output the mini-split produces. The higher the wattage, the larger and more powerful your mini split is. Here is a great mini split-size calculator. 

What Size BTU Mini Split Do I Need?

• 12000 BTU units are best for small bedrooms or bathrooms between 250 and 350 square feet.
• 18000 BTU units can cool rooms up to 700 square feet. They work well in larger offices, living rooms, and bedrooms.
• 24000 BTU (the typical 2-ton mini split) can cover medium-sized rooms easily and can even be considered for some of your larger areas that are less than 1333 square feet
• 36000 BTU units can cool even the largest rooms, up to 1,400 square feet. These are ideal for commercial spaces.

What Size Ton Mini Split Do I Need?

Make sure you pick the correct output AC unit based on the size of your space. Opting for too large an AC unit will cycle off too soon, leaving your space feeling too warm. Here are some rough guidelines:

• 1 Ton Mini Split: 545-666 Sq. Ft
• 1.5 Ton Mini Split: 818-1000 Sq. Ft
• 2 Ton Mini Split: 1090-1333 Sq. Ft
• 2.5 Ton Mini Split: 1636-2000 Sq. Ft

It always pays to consult with a professional installer before making a final purchase decision—they can recommend the best unit based on your needs, local climate, and conditions in the space you're cooling or heating.

Where to Buy 2 Ton Mini Split

You can purchase a 2 Ton Mini Split right below on The Trade Table, The Premier Home Store for HVAC products.

Buy Buck Cool Mini-Split EZ Connect 24K BTU Complete Installation Kit

The Buck Cool Mini-Split EZ Connect Installation Kit, with its 24,000 BTU capacity, is perfectly designed for efficiently managing the climate of spaces as 1,000 square feet. With an energy efficiency rating (SEER) of 21, this system excels in providing economical cooling and heating options. It is engineered for a quiet operation at 47 dBA, making it a discreet addition to any room. This single-zone system is versatile with wall and condenser mounting options and operates on a standard 230 V power supply. Certified by AHRI, it meets rigorous performance and safety standards. The kit is an excellent choice for those seeking an effective and straightforward solution for year-round indoor comfort.

Learn More About Mini-Splits

Before going any further, you need to figure out if you'll need a permit, then see how the cost of running a mini split actually saves you money...not to mention that mini-splits increase your home's value!