Skid Steer Tree Pullers

Tree pullers are the preferred attachment for clearing cedar, mesquite, buckthorn, invasive brush, volunteer trees, and fence line overgrowth on pastures, rural properties, and land clearing sites. The attachment mounts to a standard skid steer quick attach plate and uses the machine's auxiliary hydraulics to clamp a serrated jaw around the trunk before the operator lifts the machine to extract the tree.

The Trade Table carries skid steer tree pullers from Loflin Fabrication — built with heavy-gauge steel jaws, hydraulic clamping cylinders, and reinforced quick attach plates for pasture clearing, fence line work, and invasive species removal.

Skid Steer Tree Pullers | Tree & Brush Removal Attachments for Land Clearing

A skid steer tree puller works by clamping a serrated jaw around the base of a tree trunk, then using the skid steer's lift arms to pull the entire tree — trunk, root ball, and all — out of the ground in a single motion. The serrated jaw bites into the bark to prevent slipping during extraction, and the hydraulic clamping cylinder applies the pressure needed to hold the tree securely while the lift arms do the pulling work.

Tree pullers are most effective on trees up to 6 to 8 inches in trunk diameter depending on soil conditions and root system size. Softer, wetter soils release root systems more easily. Dry, compacted, or rocky soils require more lifting force and may limit the maximum tree size that can be extracted. The Loflin Fabrication tree puller is designed for the full range of typical pasture and fence line work — handling cedar, mesquite, locust, volunteer hardwoods, and invasive brush that regrows after cutting.

The advantage over cutting is regrowth control. Species like cedar, mesquite, and buckthorn resprout vigorously from stumps after a chainsaw cut — requiring repeat treatment every 2 to 3 years. Pulling the entire root system ends regrowth permanently on the pulled plant, making tree pullers dramatically more effective for long-term land management on properties with heavy invasive pressure.

Skid Steer Tree Puller Options

• Loflin Fabrication tree puller with serrated steel jaw for non-slip gripping
• Hydraulic clamping cylinder for secure grip during extraction
• Reinforced quick attach plate for universal skid steer compatibility
• Heavy-gauge steel construction for pasture, fence line, and brush work
• Protected hydraulic hoses routed to survive brush contact
• Single-lever operation for efficient tree-to-tree extraction cycles

Benefits of Skid Steer Tree Pullers

• Removes the entire tree including root system in one operation
• Eliminates regrowth permanently on cedar, mesquite, buckthorn, and other resprouters
• No stump grinding, herbicide, or follow-up cutting required
• Serrated jaw grips bark without slipping during extraction
• Faster pasture clearing than cutting plus separate stump removal
• Single hydraulic attachment handles trees, saplings, and heavy brush
• Universal quick attach for any standard skid steer loader

Common Uses for Skid Steer Tree Pullers

• Pasture clearing of cedar, mesquite, and invasive brush
• Fence line clearing along property boundaries and pasture edges
• Buckthorn, honeysuckle, and invasive species removal on managed land
• Volunteer tree removal in orchards, vineyards, and agricultural fields
• Rural and hunting property land management
• New land clearing on rural home sites before construction
• Right-of-way and easement maintenance
• Wildlife habitat management through selective brush removal

Why Buy Skid Steer Tree Pullers from The Trade Table?

The Trade Table helps customers select the right skid steer tree puller based on typical tree size, skid steer hydraulic flow, and land clearing goals. Our team provides guidance on matching the attachment to the machine's lift capacity and hydraulic output and recommending configurations for pasture, fence line, or invasive species work. We carry tree pullers from Loflin Fabrication built for the heavy, repetitive work of commercial and agricultural land management.

Also Referred to As

• skid steer tree puller
• skid steer tree pullers
• tree puller for skid steer
• tree puller skid steer
• skid steer brush puller
• skid steer sapling puller
• skid steer tree removal attachment
• cedar tree puller skid steer
• mesquite tree puller
• loflin fabrication tree puller

Skid Steer Tree Puller FAQs

How big of a tree can a skid steer tree puller remove?

Skid steer tree pullers typically handle trees up to 6 to 8 inches in trunk diameter, depending on soil conditions, root system size, and the skid steer's lift capacity. Softer, wetter soils release larger trees more easily. Dry or compacted soils limit the maximum size. For occasional trees beyond the attachment's rated capacity, extraction may require pre-cutting surface roots before pulling.

Is a tree puller better than cutting down a tree?

For regrowth-prone species — cedar, mesquite, buckthorn, honeysuckle, and similar resprouters — pulling is dramatically better than cutting. Cutting leaves the root system alive, which resprouts and requires repeat treatment every 2 to 3 years. Pulling removes the entire plant permanently in one operation. For non-resprouting species, cutting and grinding the stump is a reasonable alternative if the stump location is not a concern.

Does a tree puller leave a hole in the ground?

Yes. Removing the root system leaves a hole where the tree was pulled. On pasture and rough land, these holes are typically filled and smoothed as part of normal clearing work using the same skid steer with a grapple or bucket. On managed landscapes, the soil displacement should be planned for as part of the clearing job.

Does a skid steer tree puller require auxiliary hydraulics?

Yes. Tree pullers use a hydraulic cylinder to operate the clamping jaw, which requires auxiliary hydraulic flow from the skid steer. Standard skid steer auxiliary hydraulic flow is sufficient for most tree puller models. Machines without auxiliary hydraulics will not operate a tree puller.

Can a tree puller handle cedar and mesquite?

Yes. Cedar and mesquite are two of the most common target species for skid steer tree pullers. Both species are aggressive resprouters when cut — making pulling the far more effective long-term solution. Tree pullers are the standard tool for cedar management in Texas and Oklahoma pastures and mesquite removal across the southwestern United States.